Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 100% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Glass holder for window regulator Smart ForTwo (450)
Shared by
3DPrintedCarPartDescription
TESTING IN PROGRESS (RC3) ------------------------------------------- This is a (reinforced) adaptable glass holder for Smart's ForTwo (450) window regulator, to replace original one that broke in the middle. You're welcome to test it! There is a howto on Evilution website you just need to rerool original cables http://www.evilution.co.uk/exterior/450_window_regulator_cable.htm To ease the prints pins are separated, you need to glue them on the main part after the print. Use the modifiers file on slic3r to define a 100% infill. Don't forget the inside of the door can become hot, print material must support it. This one as been printed with Protopasta HTPLA V2. Version for left door, mirror the print for right one.
Compatible Cars
Originally published on thingiverse.com by Dave David (Cheeeese) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
