Files (2)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| lower.stl | Printable file | 162.3 KB STL | Slice file | Slice file | Slice file | Print both lower and upper parts to complete the adapter |
| upper.stl | Printable file | 163.0 KB STL | Slice file | Slice file | Slice file | Print both lower and upper parts to complete the adapter |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
GM to Double DIN car stereo adapter
Shared by
3DPrintedCarPartDescription
Needed an adapter from the General Motors (GM) stereo standard. This fits for a Buick Regal 1997–2004 and probably any Double DIN radio. It's two parts to avoid overhangs. It's basically the "ASC Double Din Car Stereo Dash Kit, Wire Harness, Antenna Adapter for some Buick 97-03 Century, 95-99 LeSabre, 95-2004 Park Avenue, 95-2003 Regal, 96-1999 Riviera, 1995-1996 Roadmaster,96-1998 Skylark" on Amazon, only this one actually works. Source on Onshape: https://cad.onshape.com/documents/30559879f3faaf3649a0f712/w/2f0fc7885c3a4a44c3a6721d/e/be7edc4e2199a57345fc8a96
Compatible Cars
Originally published on thingiverse.com by Laurenz - (peka) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
