Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| 5_speed_gmc_sifter_knob.stl | Printable file | 766.4 KB STL | Slice file | Slice file | Slice file | Ensure the nut fits the gear shifter lever before printing |
| sm465_gmc_indented_text_knob.stl | Printable file | 602.4 KB STL | Slice file | Slice file | Slice file | Ensure the nut fits the gear shifter lever before printing |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Gmc Shifter Knob
Shared by
3DPrintedCarPartDescription
This is a gear shifter I made in Tinkercad for my 1974 GMC K20 I have. It is designed to pause the print about an inch up and fit a 14 mm nut inside the model and continue the print. Once its done it simply threads onto your stick! Make sure before you put the nut in the print that it will actually thread onto your gear shifter lever! There is a file that is a 4 speed sm465 pattern set up, but i included a 5 speed version as well for later models. See my Chevy Shifter design here! https://www.thingiverse.com/thing:4286189/files
Compatible Cars
Originally published on thingiverse.com by Preston Tucker (Preston1948) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
