Final_Intake_stl.stl

STL

862.1 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Final_Intake_stl.stl	Primary model	862.1 KB STL	46g $1.10	50g $1.20	110g $2.63	Ensure proper orientation to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Headlight Intake for e30

1 downloads177 views0 likes

Shared by

Verified

Description

• Replaces a high beam headlight on either passenger or drivers side. • 3 inch outlet, easily connectable to air box with 3 inch flex hose. • Will also connect to aftermarket inline airboxes such as http://kamotorsperformance.com/bmw-e30-carbon-fiber-3-intake-kit-fits-m42-m20-m30-m50-s50-s52/ or https://www.amazon.com/Carbon-Filter-Universal-Enclosed-Induction/dp/B07DGC5WH4/ • There is tight clearance due to the core support behind the drivers side headlight but will still accept 3 inch hose. • If connected to hose, it will be hard to put on a hose clamp but it will fit at the right angles.