Headrest Hook for Subaru Vehicles - image

Files (1)

2015_Subaru_Forester_headrest_hook_v1.stl

STL

68.2 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
2015_Subaru_Forester_headrest_hook_v1.stl	Primary model	68.2 KB STL	46g $1.10	50g $1.20	110g $2.63	Verify orientation and supports in your slicer before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Headrest Hook for Subaru Vehicles

0 downloads217 views0 likes

Shared by

Michael Chen

Verified

Description

Headrest hook I made for my wife's 2015 Forester. It is designed in such a way as to mesh with the rectangular headrest bushings on this and similar vehicles. Nothing special or fancy, just a robust hook for holding purses, laptop bags, trash bags, or whatever. Print in PETG or ABS if you live in a hot climate like me! Inland brand gray matches the car interior pretty well or so I think.