Files (1)

towel_clip_screwhole.stl

STL

458.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
towel_clip_screwhole.stl	Clip	458.8 KB STL	Slice file	Slice file	Slice file	Ensure proper layer adhesion for the clip's functionality

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Headrest Towel Clamp

0 downloads60 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

1/8/19: Updated with a newer, better design. The whole model was redone. - The thicknesses were changed for optimal printing with a 0.3, 0.4 or 0.6mm nozzle.. - The curved lever handle was replaced with a standard straight one which is far better ergonomically and provides much better leverage. - The clearance tolerances were adjusted. This is a remix of the above towel clamp. I've rounded the corners around the hole and got rid of the angled edges all over it. I also added a separate hook with a hole so that you can connect the two with a zip tie or twine and use it to hang a towel from your car's headrest. If you download or collect this model, please “like” it. Thank you. By hanging a towel from your headrest, you can quickly remove the towel for washing. This helps keep your car clean. This is especially great if you go out hiking and get dirty or sweaty.