Files (1)

Hitch_cover_Peugeot_Logo.stl

STL

438.9 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

22g

Based on 25% main infill across listed model files

Material cost

$0.53

Filament only at roughly $24/kg PETG / ASA

Print time

37m–1.0h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Hitch_cover_Peugeot_Logo.stl	Cover / cap	438.9 KB STL	20g $0.48	22g $0.53	48g $1.15	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Hitch cap Peugeot / Anhängerkupplung Deckel

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Hitch cover with Peugeot Logo, made from from https://www.thingiverse.com/thing:4532764 and https://www.thingiverse.com/thing:2358976 Print Settings (Redline PLA yellow) - wall line count: 4 - Infill 50% - Speed 60mm/s - Retraction 45mm/s/5mm - 200°C Hotend, 60°C Bed - plate bonding skirt - combing mode all - no supports - printing duration at this settings about 5 hours Use bright colors, when printing in PLA or usind PETG, ABS or ASA, if you want dark colored.

Compatible Cars

Peugeot (all models)

Published Jun 26, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Fabian Fippl (tec_freakz2) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.