Files (2)

Hitch-Infiniti-Recessed.stl

STL

185.4 KB

Laundry-Divert-Hitches_v6.stl

STL

212.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Hitch-Infiniti-Recessed.stl	Printable file	185.4 KB STL	Slice file	Slice file	Slice file	Print orientation significantly affects support needs and finish quality
Laundry-Divert-Hitches_v6.stl	Printable file	212.3 KB STL	Slice file	Slice file	Slice file	Print orientation significantly affects support needs and finish quality

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Hitch Receiver Cover - Infiniti

0 downloads31 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

2 versions, one with the infiniti logo embossed, or protruding out, and the other with the logo recessed. I decided to print the recessed logo first so that i could print directly on my build plate with just a handful of supports in the recessed logo area, i took a screenshot of how i did this. Easiest to print vertical, on its face would use the least resin as it needs less supports, but you have to deal with cleaning the face up. Standing on its bottom end results in a better finish, but you will need more supports behind the cover. On its side would be fine as well, you just need to support the tube at that point though.