Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Honda_Civic_speaker_ring_6.5.3mf | Printable file | 128.7 KB 3MF | Slice file | Slice file | Slice file | Print with a 45° overhang to minimize support material |
| Honda_speaker_adapter_6-3l4_v2.stl | Printable file | 151.6 KB STL | Slice file | Slice file | Slice file | Print with a 45° overhang to minimize support material |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Honda Civic 6.5" speaker adapter (fits stock mounts)
Shared by
3DPrintedCarPartDescription
A version without the extended mounting holes and 8x evenly spaced out slots. Fits DLS Reference RC6.2i perfectly. I also made the overhangs 45° so that no support material is required. The hole also has a thin solid part to print better (it makes bridging possible for the whole hole). Just clean out with a drill bit or a knife after printing.
Compatible Cars
Originally published on thingiverse.com by Johannes Gunnarson (jojjoalex99) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
