Honda Civic Key Fob Housing Replacement - image

Files (5)

fob-front-three-buttons-no-red-button.stl

STL

865.2 KB

fob-front.stl

STL

326.7 KB

fob-front-no-red-button.stl

STL

837.3 KB

fob-back.stl

STL

480.4 KB

fob-front-three-buttons.stl

STL

884.3 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

5 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
fob-front-three-buttons-no-red-button.stl	Printable file	865.2 KB STL	Slice file	Slice file	Slice file	Ensure proper layer adhesion for durability
fob-front.stl	Printable file	326.7 KB STL	Slice file	Slice file	Slice file	Ensure proper layer adhesion for durability
fob-front-no-red-button.stl	Printable file	837.3 KB STL	Slice file	Slice file	Slice file	Ensure proper layer adhesion for durability
fob-back.stl	Printable file	480.4 KB STL	Slice file	Slice file	Slice file	Ensure proper layer adhesion for durability
fob-front-three-buttons.stl	Printable file	884.3 KB STL	Slice file	Slice file	Slice file	Ensure proper layer adhesion for durability

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Honda Civic Key Fob Housing Replacement

0 downloads230 views0 likes

Shared by

Michael Chen

Verified

Description

This key has been tested on the following models and years: It will likely work on all 8th generation Civics which run from 2006-2011. If you have success for a year not listed, please let me know and I will add it to the tested list. I found a housing here on Thingiverse, but it kept breaking. I decided to make a new one from scratch in the hopes that I could make something more resistant to daily and sometimes rough use. Its thicker and longer than the one noted below: This is not a remix of the above. It's a from scratch make. Having said that, I do want to thank the original author for the inspiration. This version has thicker walls and hopefully more "sandwiching" of pieces around the thin steel T part of the key. (Dumb design, btw, Honda.).