← Back to Browse Parts
Files (1)
Honda_Clip.STL
STL
Print guidance estimate
Estimated from part metadata
Print cost & setup estimate
Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.
1 model file
Recommended kit
50g
Based on 25% main infill across listed model files
Material cost
$1.20
Filament only at roughly $24/kg PETG / ASA
Print time
2.0h saved / 1.4h–2.4h estimate
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Honda_Clip.STL | Clip | 0 B STL | 46g $1.10 | 50g $1.20 | 110g $2.63 | Ensure proper fit in the 8mm hole by checking the clip's dimensions against the original part. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Accessories
Honda Plastic Clip (8mm, maybe?)
2 downloads539 views0 likes
Description
This clip is from the plastic covers over the backs of the front seats in my 2006 Honda Pilot, but I'm sure it's used in a slew of other places. Fit's in a hole about 8mm, so I guess that's that size.
Print Settings
Time: 2h
Filament: 50g
Supports: Not needed
Compatible Cars
Published Feb 6, 2026Updated Jul 15, 2026
Originally published on thingiverse.com · License: CC BY
Verified by drivers
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Loading fitment proof…
Sign in to share fitment proof, installed photos, and material notes.
Comments (0)
Part lists
Save this part to named public or private collections. Public lists can be shown on this part page.
Related Parts
Finding specific fitment/category matches first.
