Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Expedition_Hydroflask_holder_v1.1_v2.obj | Mount / bracket | 401.0 KB OBJ | Slice file | Slice file | Slice file | Print with a slight size increase (e.g., 103%) to account for material shrinkage if necessary |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Hydroflask and Mug holder Ford Expedition 2018
Shared by
3DPrintedCarPartDescription
This is a cup holder insert for the center console of 2018 and newer Ford Expeditions. I do not know which other vehicles it might fit. It is designed to hold a full sized Hydroflask and also has a cutout for the handle of a coffee/tea cup. Very sturdy at 25% infill. With PETG I printed at 103% to account for shrinkage so the nice fit for large water bottles would remain. 100% was too tight. Minimizing the support will greatly ease post-processing. In Cura, line supports at 10% density. Designed in Fusion 360 for personal use.
Compatible Cars
Originally published on thingiverse.com by Ken James (Kjames7170) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
