Hyundai i30 2009 Window Regulator Clip - image

Files (1)

i30_window_clip.stl

STL

214.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 40%	100% solid	Recommendation
i30_window_clip.stl	Clip	214.9 KB STL	Slice file	Slice file	Slice file	Orient the part to print with the longer edge vertically for added support and to prevent delamination

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Hyundai i30 2009 Window Regulator Clip

0 downloads43 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

These pesky bits are always breaking and require $200 to replace the _entire_ window regulator for a $0.20 plastic part! Berettah85 has made a remix of the part that is more heavy duty, so definitely go check his out here. I've found printing this thing so the longer edge prints vertically helps provide more support and prevents delamination along the forks where a lot of the force is applied. Applying a nice slathering of epoxy on the part where the metal rod clips in is a nice idea to keep everything nice and hard.