Files (1)

dustcap.stl

STL

174.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
dustcap.stl	Cover / cap	174.7 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Hyundai I30 Headlamp Dust Cap

0 downloads150 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This dust cap is for the headlamp on my 2013 Hyundai I30. According to info I saw for this item on EBay it only fits the model made in the Czech republic. The original item has a rubber O-ring for a snug fit. I mounted mine using PTFE tape wrapped round the perimeter. Design was done on FreeCad.

Compatible Cars

Hyundai i30

Published Jul 4, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by David Henry (mgadriver) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.