Hyundai Ioniq QI Compartment Organizer - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Organizers

Hyundai Ioniq QI Compartment Organizer

0 downloads35 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Divides the QI compartment of the center console so there is place for your smartphone at the back and some other stuff in the front. Also provides a slot for two standard ISO/IEC 7810 ID-1 cards (i.e. charging cards) and a slot to put your USB-C cable to stop it from dangling all over the place. This was made for the 2019 Hyundai Ioniq Electric but should also fit in the 2016 model's center console.