Files (3)

kona_box.stl

STL

31.9 KB

kona_box_and_coins.stl

STL

41.4 KB

kona_coins.stl

STL

10.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
kona_box.stl	Printable file	31.9 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to prevent warping
kona_box_and_coins.stl	Printable file	41.4 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to prevent warping
kona_coins.stl	Accessory piece	10.6 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Hyundai Kona Console Tray

0 downloads92 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a console tray for my 2020 Hyundai Kona. I remixed this from a full size tray, as I only wanted a half sized tray, but also wanted the space for coins. This is sized for US coinage. There are three STL files - a full version with the coin sorter attached, and two more that allow you to print the box and coin sorter separate to save some time and material on the supports. I remixed this in Tinkercad from the STL file from 4kiwisincairns.