Files (6)

carkit5-allparts.stl

STL

801.6 KB

carkit5_h-piece.stl

STL

2.6 KB

carkit5_holderpart1.stl

STL

243.9 KB

carkit5_holderpart2.stl

STL

87.0 KB

carkit5_main.stl

STL

323.3 KB

pegs-5.5mm.stl

STL

7.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

6 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 20%	100% solid	Recommendation
carkit5-allparts.stl	Printable file	801.6 KB STL	Slice file	Slice file	Slice file	Print the holder parts vertically as designed to avoid supports
carkit5_h-piece.stl	Accessory piece	2.6 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
carkit5_holderpart1.stl	Mount / bracket	243.9 KB STL	Slice file	Slice file	Slice file	Print the holder parts vertically as designed to avoid supports
carkit5_holderpart2.stl	Mount / bracket	87.0 KB STL	Slice file	Slice file	Slice file	Print the holder parts vertically as designed to avoid supports
carkit5_main.stl	Printable file	323.3 KB STL	Slice file	Slice file	Slice file	Print the holder parts vertically as designed to avoid supports
pegs-5.5mm.stl	Accessory piece	7.5 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

(i)phone holder Citroen DS3

1 downloads48 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Designed for my Iphone SE2020 with case (140x70x10mm) but can be used for many other (i)Phone models. Printing: main - Infil 20% holderparts - Infill 100%, printed standing up pegs, h-part - Infill 100% The 2 holder parts can be connected with the 2 pegs with some force and then secured with a drop of superglue. The holder parts are printed verticaly without supports. It can be clicked firmly in to place after you placed the h-part (see last photo).