Files (3)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| ChargerHolder_Holder.stl | Mount / bracket | 2.9 MB STL | Slice file | Slice file | Slice file | Print with a brim for stability |
| PlugHolder-Body.stl | Mount / bracket | 1.7 MB STL | Slice file | Slice file | Slice file | Print with a brim for stability |
| PlugHolder-CableHook.stl | Mount / bracket | 157.9 KB STL | Slice file | Slice file | Slice file | Print with a brim for stability |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
IEC 62196 Type 2 plug holder and Nissan Leaf charged holder
Shared by
3DPrintedCarPartDescription
A friend needed a plug and charger holder for his Nissan Leaf. He found this https://www.thingiverse.com/thing:2705321. So I redesigned it in order to make another way to mount it (with counter sink wood screws) and also be able to print in two parts to avoid using supports and more strength. Also designed a holder for the original charger.
Compatible Cars
Originally published on thingiverse.com by Kisolre Kisolre (kisolre) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
