Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| AWPHONE_mesh_v3_Honda.stl | Printable file | 227.3 KB STL | Slice file | Slice file | Slice file | Ensure the print bed is level and clean for optimal adhesion |
| AWPHONE_MESCH_1_Smaller_CD_slot.stl | Printable file | 447.9 KB STL | Slice file | Slice file | Slice file | Ensure the print bed is level and clean for optimal adhesion |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Iphone 6 plus + case with CD slot mount for Honda Civic 2012
Shared by
3DPrintedCarPartDescription
Just another cd mount for iphone 6 plus or 6, works on a 2012 Honda Civic 2012 with their skin cases. Had to make angled as the Honda CD player is angled up so I had to make the mount angled. I also made it so that it has less print material needed. I've also made one same size (the second file) but for other cars with a smaller CD slot that is flat not angled. This works great when the Iphone 6 + is upright as well. Will probably work on Iphone 7 plus as well since it's almost the same size.
Compatible Cars
Originally published on thingiverse.com by (rmancini) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
