iPhone 6/s Plus Holder for BMW vehicles - image

Files (4)

i3_iPhone_6_Plus_holder.STL

STL

313.2 KB

i3_iPhone_6_Plus_with_case_holder.STL

STL

312.0 KB

i3_iPhone_6_Plus_with_case_holder_Hole.STL

STL

334.9 KB

iPhone_case_hole_7s_case.STL

STL

315.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
i3_iPhone_6_Plus_holder.STL	Mount / bracket	313.2 KB STL	Slice file	Slice file	Slice file	Ensure a stable and level print bed for optimal results
i3_iPhone_6_Plus_with_case_holder.STL	Mount / bracket	312.0 KB STL	Slice file	Slice file	Slice file	Ensure a stable and level print bed for optimal results
i3_iPhone_6_Plus_with_case_holder_Hole.STL	Mount / bracket	334.9 KB STL	Slice file	Slice file	Slice file	Ensure a stable and level print bed for optimal results
iPhone_case_hole_7s_case.STL	Printable file	315.9 KB STL	Slice file	Slice file	Slice file	Ensure a stable and level print bed for optimal results

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

iPhone 6/s Plus Holder for BMW vehicles

0 downloads24 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A phone holder for a BMW i3. Uses the extra accessory slots in the car to hold the phone. *Created an additional model for the version with a case. This has a hole for charging.