iPhone Holder for Mini Cooper vehicles - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

iPhone Holder for Mini Cooper vehicles

0 downloads31 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This will replace the Ashtray in your Classic Mini. --Box-- Use six M2.5 x 15mm screws to attach the front to the main Box. Here you will also need to cut the thread into the Box. --Slider-- Use one M3 x 15mm screw to attach the small slider to the box. Best to use a locknut from below. Not to tight so that it slides in and out easy. Use three M4 x 10mm screws to attach the Phone Holder to the Slider. In the Slider you need to cut an M4 thread. To connect the two sliders i used a cut of peace of 3mm Filament. -- Mount to Mini -- Once assembled push the slider in all the way and mount the box to you Mini. Done! I only have an iPhone so i only made an iPhone holder. You can create your own adapter to suit your Phone. The three mounting screws are 15mm apart. A Spin off EMPY BOX is also available: http://www.thingiverse.com/thing:2207925