Files (2)

Dummy-card.stl

STL

18.6 KB

iPod_Nano_3g_Carmount_adapter.stl

STL

34.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Dummy-card.stl	Accessory piece	18.6 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
iPod_Nano_3g_Carmount_adapter.stl	Mount / bracket	34.8 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

iPod Nano 3g Carmount

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a carmount design for the iPod Nano 3g. The carmount itself is a universal air vent carmount for a navigation system of the brand Denim. The carmount is made suitable for the iPod by using the 3D printed adapter. Instead of the air vent I used the ticket holder (for parking cards etc) in my Citroen C3 Picasso. The carmount can be clamped on the 3D printed dummy-card and put in the ticket holder.