Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Jeep Cherokee KL Cargo Management System Right
Shared by
3DPrintedCarPartDescription
This part will allow you to move the Off-Road Accessory Kit over to the right side where it fits perfectly into the alcove where there are two bag hangers. This gets it out of the way of the main cargo area. (see pictures) This was designed for the 2017 Jeep Cherokee (KL) Trailhawk without the subwoofer. I believe this option removes the alcove. Any other year of Cherokee wasn't tested and I am not sure it will fit as designed. It was designed so no adhesives or modifications were needed. It just slips into place and tucks up under the overlapping plastic panel. So far after a few weeks of use I have seen no issues. Its nice to have it out of the cargo area, but still visible and available. Installation is simple. Align the bottom tabs to the left of the bag hooks and push the bottom into the hooks until you can fit the top up into the upper plastic panel. Then slide the whole thing to the right and guide the tabs into the bag hooks. UPDATED: Added tabs to the bottom to help it fit the bag holder clips tighter.
Compatible Cars
Originally published on thingiverse.com by Jeff Carlin (jcarlin) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
