Files (2)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Jeep_license_plate_bracket_v3.stl | Mount / bracket | 50.3 KB STL | 10g $0.24 | 11g $0.26 | 24g $0.58 | Ensure proper bed adhesion to prevent warping |
| lens_for_license_plate_light_v1.stl | Accessory piece | 1.4 KB STL | 8g $0.20 | 9g $0.22 | 20g $0.47 | Small functional file: print slowly; consider 80–100% infill for durability. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Jeep CJ YJ License Plate Bracket with lens for LED Strip light
Shared by
3DPrintedCarPartDescription
License plate bracket for Jeep CJ and YJ. May fit on others too. There is a spot for a strip of LED tape for the license plate light. Added lens to cover LEDs. Printed on an enclosed and modified Ender 3 out of ABS. I printed it out of 3D Solutech Black ABS for the bracket and clear ABS for the lens, nozzle temp of 245, bed temp of 90 and 20% infill. Warning, the bracket just barely fits on the Ender 3 when rotated 90 degrees and when there is no skirt, brim or raft. If you watch the video please watch it until the end. I improved the bracket and made the lens in an update at the end. https://youtu.be/13KUM3J0K4U
Compatible Cars
Originally published on thingiverse.com by Chuck Bryant (3rdpig) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
