Files (1)

jeepmirrorgrilllogo1.stl

STL

541.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
jeepmirrorgrilllogo1.stl	Primary model	541.8 KB STL	Slice file	Slice file	Slice file	Ensure a strong bond to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mirror Covers

Jeep "Doors off" mirror mounts

0 downloads59 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I have bought and hated all aftermarket "doors off" mirrors. They are noisy, hard to adjust, wont stay adjusted, and can't be left on the Jeep. OEM side bolts used to attach to Jeep. The surface area of the arm is 2in.This is one example of an adjustable blind spot mirror that you can use to mount to it but you can use whatever as long as it is 2 inches. https://www.amazon.com/dp/B001DKT0DO/ref=cm_sw_em_r_mt_dp_U_g-KBEbVMH733B