Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 35% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| jeephubcover.stl | Cover / cap | 72.1 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA; check sealing faces and verify in slicer. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Jeep Grand Cherokee '99-2004 Hub cover cap
Shared by
3DPrintedCarPartDescription
I try to keep my 2003 Jeep Grand Cherokee looking as good as possible. The hub cover caps were missing from the factory wheels when I bought it. I've looked for them on-line, but if you can find them they are quite expensive. It occurred to me that I could print a reasonable replacement. So I got out my digital caliper and took some measurements. Be sure not to trim the 1/2 millimeter "flange" on the bottom off, it creates a friction fit to hold it in place. If you build with supports on you will have to file the shoulder a bit to get it to go in all the way. Although it is a tight fit, I put a little super glue in the shoulder of the wheel on one. The other I just "snapped" in. Both have stayed in place, so I'm not sure the glue is needed. Enjoy!
Compatible Cars
Originally published on thingiverse.com by David Jackson (anil8tor) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
