Jeep JK 3.8L (2007-2011) Air Compressor Bracket - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Jeep JK 3.8L (2007-2011) Air Compressor Bracket

0 downloads200 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a bracket for mounting a Viair clone type compressor in a Jeep JK (3.8L). It mounts on two bolts on the brake booster underneath the master cylinder in a manner similar to the Dominion Offroad or Synergy compressor mounts. The tray bends and holes on this are specifically sized for a TJM compressor, so it is not a universal fit, but I included the solidpart files so you can edit it. I cut this out of 14 gauge steel on a CNC plasma, hence the tray bends and gusset, which I MIG welded on. If you have thicker stock around, I'm sure you can skip them.