Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Jeep JL iPad Mount

0 downloads36 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This iPad mounting solution is working with 67 Design rail. I used 3/8 x16, 12'' threaded rod with nuts x8. iPad holder w/ apple pencil holder, with 20mm ball mount, will work with 67 design mount. Fits 170-187mm iPad w/ or w/o case. Mounting parts with 67 Design rail can be found here https://www.thingiverse.com/thing:4197841 Max part length is 105mm, small printer-friendly. To achieve better look, gonna find a solution to cover the shining rod PLA is working ok, not sure it will survive in summer. Some of the early prints have shown the deformation due to the higher temperature, which will course loose parts and vibration. ABS, PETG and anything have higher deformation temperature is recommended.