Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Jeep Performance wiper clips

0 downloads26 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Replacement clip to keep the hose attached to the wiper arms. The original is a little bit too loose and was not providing a nice grip. So I REDESIGNED the original part to a tighter grip on the arm. * DO NOT PRINT THIS COMMERCIALLY * * I'm not responsible or OWN any RIGHTS to the original part that is a creation by Jeep/Stellantis * * I'm not responsible for any accident, issues or any side effects this may have on you, your family or your vehicle. If you do print this part and use, you are assuming all risks and I'm therefore not liable for any outcomes of it. *