Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Jeep_strut_holder_.stl | Mount / bracket | 672.2 KB STL | Slice file | Slice file | Slice file | Print with 'Jeep Life' facing down on the print bed for optimal results |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Jeep strut holder (worn rear glass struts)
Shared by
3DPrintedCarPartDescription
The gas struts on my JK Jeep Wrangler were starting to wear out and would not hold up the glass anymore, so I printed this strut helper that snaps on the strut and keeps it up when needed. -You only need 1 of these to hold the rear glass on a Jeep -PLA has been working fine for me but I would imagine in the hot summer days it will shrink over time, maybe use PETG or ABS. -Print orientation with "Jeep Life" facing down on the print bed -strut diameter measures roughly 5/8" so this might also work on other vehicles and also on hood struts.
Compatible Cars
Originally published on thingiverse.com by XY Zebruh (XYZebruh) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
