Jeep TJ Climate Control Knob (early TJ) - image

Files (1)

Jeep_Early_TJ_Climate_Control_Knob.stl

STL

839.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Jeep_Early_TJ_Climate_Control_Knob.stl	Primary model	839.6 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Jeep TJ Climate Control Knob (early TJ)

0 downloads31 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a climate control knob for an early TJ (Pre-1999) model. If the heater control is a straight line, this is the correct knob (see picture). I imagine this will work with other Chrysler brand vehicles with the same setup. I printed with.1 height, 3 walls, and 25% infill.