Files (3)

Dash_Holder.stl

STL

111.3 KB

Holder_L.stl

STL

72.9 KB

Holder_R.stl

STL

72.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Dash_Holder.stl	Mount / bracket	111.3 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping
Holder_L.stl	Mount / bracket	72.9 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping
Holder_R.stl	Mount / bracket	72.3 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Jeep TJ dash holder

0 downloads29 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a tablet/phone holder that fits between the grab bar and the dash on a 1997-2006 Jeep TJ. Version 2 has the holder split in half with arms on either side locking the phone into place.