Files (1)

Jeep_Wrangler_Cutter_5x4.stl

STL

1.1 MB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 100% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / food-safe PLA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / food-safe PLA 20%	PETG / food-safe PLA 100%	100% solid	Recommendation
Jeep_Wrangler_Cutter_5x4.stl	Primary model	1.1 MB STL	21g $0.50	50g $1.20	50g $1.20	Use food-safe filament to ensure the cookie cutter is safe for use with food.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Jeep Wrangler Cookie Cutter

0 downloads160 views0 likes

Shared by

Michael Chen

Verified

Description

I was on a cookie cutter printing spree for Christmas, so I decided to make a few custom designs. I created this one for Jeep nuts. I recommend using food safe filament and making sure that you clean up any little strings and stuff that could end up in the cookies. If you chill the dough well beforehand and roll it about 1/4" thick this cuts nicely with no need for oil or other release agents. Best results were printing with 100% fill and 2x nozzle width thickness on sides and bottom.