Files (2)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / TPU 20% | PETG / TPU 35% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| CupHolderPad_75mm_Final.stl | Mount / bracket | 347.5 KB STL | Slice file | Slice file | Slice file | Print with a slow speed for the small tab to ensure it comes out well |
| CupHolderPad_79mm.stl | Mount / bracket | 361.8 KB STL | Slice file | Slice file | Slice file | Print with a slow speed for the small tab to ensure it comes out well |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Jeep Wrangler Cup Holder Inserts
Shared by
3DPrintedCarPartDescription
My wife's 2012 Jeep Wrangler did not have inserts in the front cup holders. These inserts have a small lip to them that will capture drips and crumbs. There is a small tab designed in to allow you to grab it with some needle nose. It is small tab that you will need to slow the print down if you want it to come out well. In the end it is probably not critical and if it does not print well you can just cut it off. Mine printed pretty good and seems secure. Note there are 2 different sizes for the front cup holder. You will need to print one of each. Printed with TPU, not sure what size adjustments may be needed if you print in a different or a rigid material. Enjoy.
Compatible Cars
Originally published on thingiverse.com by Mike Bayliff (Finktrain) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
