Jeep Wrangler Hard Top Fastner Block Nut Clip - image

Files (1)

Jeep_Hard_Top_Clips.stl

STL

193.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 35%	100% solid	Recommendation
Jeep_Hard_Top_Clips.stl	Clip	193.8 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Jeep Wrangler Hard Top Fastner Block Nut Clip

0 downloads29 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is the first thing I have created for a friend who just got a Jeep, and discovered the nuts fell into the bed when the hard top was removed. These clips will hold the nut in place. I printed it in 75% fill to make them strong, however I'm not sure it was necessary since there is really no stress on the part. Print with support.