Files (2)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| GarminBallStub.stl | Printable file | 1.2 MB STL | 30g $0.72 | 33g $0.78 | 71g $1.71 | Ensure a snug fit by adjusting the print settings if necessary |
| HartopLatchBracketJK.stl | Mount / bracket | 80.2 KB STL | 12g $0.28 | 12g $0.30 | 27g $0.66 | Ensure a snug fit by adjusting the print settings if necessary |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Jeep Wrangler JK Garmin GPS mount for Hardtop Latch
Shared by
3DPrintedCarPartDescription
I looked for a GPS mount to buy or print and ended up making my own. It's 2 parts for easy printing that I epoxied together to form a clip into place mount that keeps the GPS out of sight and still easy to see. A nice snap into place indicates a good snug fit. I lightly sanded the ball to knock off any rough edges and it fits the Garmin mount socket nicely.
Compatible Cars
Originally published on thingiverse.com by Ty Creek (TyCreek) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
