Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

0 model files

Recommended kit

—

Based on 25% main infill across listed model files

Material cost

$0.00

Filament only at roughly $24/kg PETG / ASA

Print time

—–—

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Jeep Wrangler JK Ram Dash Mount

0 downloads45 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This dash mount will allow mounting of 3 devices on a Jeep Wrangler JK or JKU. I'll be adding additional mounts in the future. The Ram mount is 25mm and I used screws from a computer case to attach it. The mount has been road tested with 2 Samsung phones and a Garmin 66i GPS on a country backroad with plenty of bumps.

Compatible Cars

Jeep Wrangler

Published Jun 30, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Steve H (esh81) · License: CC BY-NC-SA

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.