Jeep XJ Cherokee rear spray nozzle clip repair - image

Files (1)

rear_wiper_sprayer_repair_V2.STL

STL

93.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
rear_wiper_sprayer_repair_V2.STL	Primary model	93.8 KB STL	Slice file	Slice file	Slice file	Print on its side for best results and minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Jeep XJ Cherokee rear spray nozzle clip repair

0 downloads26 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The plastic spray nozzle on my 1999 Jeep XJ broke into two pieces when i was changing my wiper blades. This simple retainer wraps around the two pieces and holds them to the arm without glue. This adapter will work on all 1997-2001 XJ Cherokees but may work on other years as well. For best results and no supports; print it on its side.