Files (1)

YJ_2.5_AIRBOX_CLIP.STL

STL

25.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 40%	100% solid	Recommendation
YJ_2.5_AIRBOX_CLIP.STL	Clip	25.3 KB STL	Slice file	Slice file	Slice file	Check and adjust the length of the clip as needed for a secure fit

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

JEEP YJ 2.5L AIRBOX CLIP

0 downloads47 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The OEM steel clips for the undesirable 2.5L 1990 YJ's and MJ (Comanche) are basically unfindable. Though trial and error I fitted these. Test drove an none fell off. I've included the solidworks file, the length may need to be tweeked. (I had one loose one that needed a shorter version) Printed in plain nylon, 40% infill and 5 walls.