Jeep Zip Tie License Plate Mount (No Drilling) - image

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

0 model files

Recommended kit

—

Based on 25% main infill across listed model files

Material cost

$0.00

Filament only at roughly $24/kg PETG / ASA

Print time

—–—

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Grilles

Jeep Zip Tie License Plate Mount (No Drilling)

0 downloads32 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I designed this bracket to mount a license plate to a Jeep Grand Cherokee 2015. It uses two Zip Ties to secure the brackets (No Drilling). I mounted it on the lower mesh grille (circled in red) (stock photo). Measure it out, zip tie brackets and screw in license plate. Enjoy!!