Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Key Cover for BMW vehicles
Shared by
3DPrintedCarPartDescription
Cover/Case for BMW key fob. The buttons on these keys are very easily pushed in a pocket and the range is pretty respectable, potentially leaving your car unlocked until your return... This print was designed to help stop this happening. The case clicks into the grooves in the side of the key (can be stiff to begin with, loosens over time) There is a hole that runs down one side for a length of wire/string so that when the key is in use, the cover doesn't get lost! Printed vertically (as shown in slicing software photo) with minimal supports: 10% @ 1.5mm spacing.
Compatible Cars
Originally published on thingiverse.com by Jake Monaghan-Gray (OneDotSixDesign) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
