Kia Cee'd (Ceed) Red Bull Can Holder - image

Files (2)

Canholder_V5.3mf

3MF

191.9 KB

Canholder_V5.stl

STL

775.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
Canholder_V5.3mf	Mount / bracket	191.9 KB 3MF	Slice file	Slice file	Slice file	Ensure the print bed is level and clean for optimal adhesion
Canholder_V5.stl	Mount / bracket	775.9 KB STL	Slice file	Slice file	Slice file	Ensure the print bed is level and clean for optimal adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Kia Cee'd (Ceed) Red Bull Can Holder

0 downloads58 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is an ring-insert for the Hyundai 84699-3x000 Supplement C/Holder (which often comes in Kia Ceeds, as Hyundai owns Kia - see pictures). It shrinks the diameter of the supplement holder down to closely fit a Red Bull can or any other can with the same diameter. The can then cannot fall over even when accelerating or braking severely. The top of the insert has a somewhat steep fillet towards the center so placing the can inside - even when not looking while driving - is easier. Important note: Print this in PETG or something else that is quite temperature resistant. If your car is out in the sun you don't want the insert to melt down when it's printed in PLA.