Files (3)

kia_ceed_headlight_cover_80mm.stl

STL

652.5 KB

kia_headlamp_dust_cap_halogen.stl

STL

3.7 MB

kia_headlamp_dust_cap_led.stl

STL

3.8 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
kia_ceed_headlight_cover_80mm.stl	Cover / cap	652.5 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
kia_headlamp_dust_cap_halogen.stl	Cover / cap	3.7 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
kia_headlamp_dust_cap_led.stl	Cover / cap	3.8 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Kia Headlamp Dust Cap

0 downloads47 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Created this replacement headlamp dust cap for a Kia Cee'd 2006. Should also fit in these models: - Sportage 2010 - Sorento 2006 - Carens 2006 - Sedona 2006 - Seele 2012.