Files (1)

Kia_Caps_Final.stl

STL

37.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Kia_Caps_Final.stl	Cover / cap	37.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Kia Niro FE Wheel Hub Cap

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I was looking at my Kia Niro FE wheels, and noticed that under the plastic wheel covers is some pretty nice alloy rims. My guess is the wheel covers are only there for aerodynamics, and may increase gas mileage by 1%, ha. Anyways, the only problem with not using the wheel covers, is that there is no dust cover for the wheel hubs. These fit perfectly in either the front or back wheel hubs, and match the wheels pretty good. These were designed with my very limited Tinkercad knowledge, so hopefully someone can remix these, and put the Kia logo in the center! Note: Be sure and rotate these 180 degrees so the flat side is down!