Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Kia Niro PHEV 120v Charger Mount for 3" Pole
Shared by
3DPrintedCarPartDescription
I needed some place to put my 2019 Kia Niro 120v charger. mickeshobby had a good design but it was for mounting on the wall. I took that and modified it to be able to be mounted on the 3in pole in the middle of my garage. I also took and modified Levi8than's J1772 connector thing so that the cord doesn't just dangle on the floor as well. I used 3 U-Bolts to connect the components together and to the pole. The ones I used are Everbilt 3/8 in. x 3-7/16 in. 4-9/16 in. Coarse Zinc-Plated #334 U-Bolt. I got them from Home Depot. The bolts will easily slide into the Pole Mount parts. They will be a tight fit for the the other half of the parts. This is by design.
Compatible Cars
Originally published on thingiverse.com by Matt Schott (GlitchTech) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
