Kia Sportage 2022 center console (Mittelkonsole) inlay preview

Files (1)

bigger part stl file.stl

STL

85.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
bigger part stl file.stl	Primary model	85.2 KB STL	Slice file	Slice file	Slice file	Print with the inlay face down to match the carbon fibre optic surface style

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Kia Sportage 2022 center console (Mittelkonsole) inlay

0 downloads87 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG or ASA for durability and heat resistance

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill for a balance between flexibility and weight

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

I printed the models in TPU face down on a carbon fibre optic surface to match the style of my center console. You can easily add some thickness in the slicer by only raising the z height if you want more height. Take care if you do so, just adjust the z axis and not also x and y because it will not fit anymore. THIS IS A QUICK FIX AND STILL A WORK IN PROGRESS MODEL. It works perfectly for me but if you have any need for adjustments, all needed files are in included so feel free to play around with them.