Lada Granta original wheel disk cap - image

Files (2)

Lada_Granta_wheel_disk_15_1.stl

STL

1.0 MB

Lada_Granta_wheel_disk_15_2.stl

STL

711.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Lada_Granta_wheel_disk_15_1.stl	Printable file	1.0 MB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
Lada_Granta_wheel_disk_15_2.stl	Printable file	711.4 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Lada Granta original wheel disk cap

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is Lada Granta original wheel disk cap. This wheel disks used on LUXE and NORMA+ versions of Lada Granta. Printed by SBS filament. Model consist from two part, which connected by M4*8mm screws DIN912.