Files (1)

wheel_cap.stl

STL

122.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
wheel_cap.stl	Cover / cap	122.2 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Lada Vesta 55mm wheel cap

0 downloads31 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Car 55mm wheel cap. Sources can be found here: https://a360.co/2KWWExA Update: 05.10.2019 PETG caps successfully survived the seasonal replacement of tires on wheels. Not a single latch fell off after they were knocked out of the wheel and put back.