Land Rover Defender rear seat tablet semi- permanent holder using Click & Go system - image

Files (1)

plug_plate_001.stl

STL

1.9 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
plug_plate_001.stl	Primary model	1.9 MB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Land Rover Defender rear seat tablet semi- permanent holder using Click & Go system

0 downloads42 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Create a cheap rear entertainment system for your kids. Designed to fit into built in LandRover Click & Go plug base. Requires: - 3M double sided tape between the base plate and the back of any cheap tablet (Amazon Fire or other). - M2.5 insert brass nut and M2.5 screws (6mm) to connect base plate to plug.