Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| DefenderSeatLever.stl | Primary model | 5.4 MB STL | Slice file | Slice file | Slice file | Ensure a tight fit by adjusting the print scale if necessary |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Land Rover Defender seat lever knob
Shared by
3DPrintedCarPartDescription
Well after 17 years the small little plastic thing from the backseat - adjustment - lever fell off. (in German: Hebel für Rückenlehnenverstellung) So I decided to make a new one. It works well for my 2003 TD5 on standard seats. The slot is tight fit to the lower part of the lever. It is held in place with the small dents in the profile of the lever. No need of a complicated plastic model:-) (In my preview the STL is not shown... but it is within the file list).
Compatible Cars
Originally published on thingiverse.com by J. Brex (droemel) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
